Project Binky - Episode 32 - Austin Mini GT-Four - Turbocharged 4WD Mini

4 394
16
 
In episode 32 of Project Binky we finish off the engine build with more brackets, sensors, wiring and a shed load of fab work. A lot to pack into this one, hope you can appreciate the amount of work involved.
NMFP Mug available from: badobsessionmotorsport.co.uk/shop/nmfp-mug/
Delphi 34 Pin Connecctor Available from: badobsessionmotorsport.co.uk/shop/34-pin-delphi-connector-kit/
Become a Patron at www.patreon.com/badobsessionmotorsport
Find us on Twitter @badobsessionmsp
Instagram @badobsessionmsp
And on Facebook too: @badobsessionmotorsport
#projectbinky
Motor
Runtime: 44:00

Kommentarer

Brando
Brando - 5 timer siden
I'm thinking about 90% of the minis weight is brackets at this point.
Nick Thomas
Nick Thomas - 9 timer siden
Are you making two binkys and that is why you need the larger than needed transportation?
zeake13
zeake13 - 12 timer siden
They should have just built a space ship from scratch.
Ralph Deonarine
Ralph Deonarine - 15 timer siden
This project is beyond epic! The level of attention to detail is out of this world! Great job, guys!
Lp Henry
Lp Henry - Dag siden
3:45 Episode One ....he said WHAT?
1BigBen
1BigBen - Dag siden
he said the stripping down wouldn't take long, he didn't say that the build wouldn't take long.
melonbobful
melonbobful - Dag siden
I appreciate content directed at the Britisphere side of the Anglosphere. There is enough Yankisphere side of the Anglosphere contnent.
Ian Ritchie
Ian Ritchie - Dag siden
...takes "whole new level" to a whole new level, on so many levels. Cannot wait for the noise....
seeni gzty
seeni gzty - Dag siden
Am I the only one looking forward to seeing the haircut next episode?
shipwrek
shipwrek - Dag siden
Carb in the trash throw down on basically 99% of American car YouTube is lit. Honestly expected a bunch of "I'm unsubbing!!!!!!!" from avatar pics of backward hat and sunglasses wearing old fat white guys.
seeni gzty
seeni gzty - Dag siden
MORE WIRING
Andrew Bellew
Andrew Bellew - 2 dager siden
Only one thing I really would have liked to see. An apprentice/trainee during this process, these skills/experience need to be learned and passed on.
Scott Wheeler
Scott Wheeler - 2 dager siden
Amazing fabrication work I can sit here watching theses guys all day only bad point the bloody music lol 👌👏👏👏👏😁😁
Rock girl
Rock girl - 2 dager siden
Tightened up by a spanner... With a spanner.
ImBarryScottCSS
ImBarryScottCSS - 2 dager siden
I may not be using dial up but I can confirm I AM watching on a CRT :D
kevin waygood
kevin waygood - 2 dager siden
nice to see a bit of mini in this mini !
Paul Marsh
Paul Marsh - 2 dager siden
When do we expect to see the car back from paint? Looking forward to seeing the finished product. 👍
Rock girl
Rock girl - 2 dager siden
WAAAAAAH ! NO MORE EPISODES FOR ME TO BINGE WATCH !
TIMARUblitzkrieg
TIMARUblitzkrieg - 3 dager siden
found this build a couple days ago, have just binge watched all episodes. bloody amazing what you two are doing here, cant wait for the next episode.
Lammy m
Lammy m - 3 dager siden
How am I just finding this channel 👏👏 subscribed immediately
Just Enough
Just Enough - 3 dager siden
Wishing I'd paid atention in metalwork class now, instead I just made rude shaped keyrings. Oh well, opportunity lost.
mickstrick_ 91
mickstrick_ 91 - 3 dager siden
The quality about everything is absolutely insane 🤯🤯
Wicked Snake
Wicked Snake - 3 dager siden
And now I have to wait 1000 years for new video. But I want to see that mini doing 210 km/h on highway with semi slick tires and hopefully 2 cop cars behind that mini
Taylor Ray
Taylor Ray - 3 dager siden
That coil pack bracket is absolutely beautiful. I want a mill and a lathe so bad for reasons like this. However, i don't think I'm accurate enough to use one. lol
Taylor Ray
Taylor Ray - 3 dager siden
Also, this channel is amazing.
Icaros Savvides
Icaros Savvides - 3 dager siden
Great series not constrained by stupid production companies that haven't a clue what they're filming and refreshingly no bleeping! One thing though, isn't the crank sensor a hall effect (three wire) and the camshaft sensor a magnetic (two wire, you've also got the meter set to AC volts whereas a Hall output would need to be set to DC)? Sorry to let Mr Picky out of the box!
MG Gtfour
MG Gtfour - 4 dager siden
When you own a classic mini and a Celica GT four there’s not really anything better to watch!
1BigBen
1BigBen - 3 dager siden
so you are just waiting for the Binky to finish, to get the cad files so you can stated chopping 👍
Michael Webber
Michael Webber - 4 dager siden
MORE WIRING
RE
RE - 4 dager siden
Am I the only one looking forward to seeing the haircut next episode?
Naibaf Abdul Kobor
Naibaf Abdul Kobor - 4 dager siden
It's incredible how much Bad Obsession Motorsport has changed the game.
It's just impossible to watch _any_ other car channel without thinking: Bunglers! Bunglers! Bunglers!
bouytt guyt
bouytt guyt - 4 dager siden
Tightened up by a spanner... With a spanner.
soundmaster1966
soundmaster1966 - 4 dager siden
The cooler itself was an unbelievable project. Love to see the car running😎👍🏻
Rhianne Moll
Rhianne Moll - 4 dager siden
I am always so terribly disappointed whenever the end credits roll :'(
Dan B.
Dan B. - 4 dager siden
WAAAAAAH ! NO MORE EPISODES FOR ME TO BINGE WATCH !
bouytt guyt
bouytt guyt - 4 dager siden
noburn.info/id/video/uHale8afmqyye5Q.html
socketus puppetus
socketus puppetus - 4 dager siden
wow, i missed the first time i watch it. But did you cut a radiotor in tree pieces and then flip them 90degrees. And then welded them to create a max airflow path . So you inverted a basic radiator. kudos to you!
Ross Moore
Ross Moore - 4 dager siden
Absolutely fascinating!
Valdarious
Valdarious - 4 dager siden
Wow, that brought back memories https://youtu.be/YD36ZhpHPpE
Chengdogu
Chengdogu - 5 dager siden
And just how capacious is an elephant scrotum? It isn't, because elephants don't have a scrotum.
Malcolm Henry
Malcolm Henry - 5 dager siden
It's a little known fact that several original critics of Homer's Odyssey described it as "Binkian" in length.
CME Racing
CME Racing - 5 dager siden
Please won't someone think of the children... & get these guys a CNC waterjet... 😎
Joel Bennett
Joel Bennett - 5 dager siden
Pretty sure by now that by weight, Project Binky is 50% brackets.
a name
a name - 5 dager siden
I think I caught up too fast. Watched 1-32 in 5 days. Friggin' mad build.
seeni gzty
seeni gzty - 5 dager siden
That was great!
Adam England
Adam England - 5 dager siden
#topgear I hope you are seeing this. These guys deserve half of one of your episodes at least! There is much love for a couple of utter lunatic guys turning a classic old British rust bucket into a highly engineered tarmac eating, fire breathing monster. Please please give them a well constructed feature
Adam England
Adam England - 5 dager siden
Smashed it again lads. Top job. I can't wait to see this come together. Really great work and filming. And nice AVE references 👍🤟
seeni gzty
seeni gzty - 5 dager siden
bigger o-ring on the old 1000's and avoid all the spacer hullabaloo in the first place???
Evan Peck
Evan Peck - 5 dager siden
As much as I want to see this car finished, I also never want this series to end.
C M B
C M B - 5 dager siden
More fabrication than the WHO.
Allan Wallace
Allan Wallace - 5 dager siden
Is the location of the transducer on the t piece at a right angle to the general flow of pressure going to make any significant difference to the value it reads for a given pressure?
(apologies if this has been asked, I cannot be bothered going through 2048 comments to check)
younghwan kim
younghwan kim - 5 dager siden
https://youtu.be/RBBJbnjtzDc
Elliott F
Elliott F - 5 dager siden
Crap.. I have watched ep 1 to 32 in a few days and ran out...
1BigBen
1BigBen - 5 dager siden
next is The Escargot, then you start on Q&A outtakes, Howie Did It and the rest and in our hour of need bad obsession motorsport and overclockiers uk noburn.info/id/video/02XElMppZqF6bnI.html bad obsession motorsport and ed china noburn.info/id/video/v3m3qcqBqayQnZQ.html
Gideon Dixon
Gideon Dixon - 5 dager siden
PAINT!!!
kidfromtheseventies
kidfromtheseventies - 5 dager siden
So this engine is going where the back seats used to be yes?
new name
new name - 22 timer siden
No!
Alanmony
Alanmony - 5 dager siden
I know how much Nik loves his step drills, he might enjoy the first part of this video: https://www.youtube.com/watch?v=DyJWa3Vbi8s
jimmi henry
jimmi henry - 5 dager siden
2:11 you got an CNC! When did you build that?
ndawgtkd
ndawgtkd - 5 dager siden
Received my order of Onesies today, the quality is top notch. Thank you for everything :)
Jonathan Martin
Jonathan Martin - 5 dager siden
Looking awesome, thanks for taking the time to showcase this project. Love every minute.
Beaglone
Beaglone - 5 dager siden
Can't help but think these Chaps watch Ave, because reasons ;)
ELsplitterz
ELsplitterz - 5 dager siden
I stumbled upon this series 4 days ago. Have just spent the night drinking by myself and watching the last 5 episodes so I'm up to date! I don't know how you lot have done it since the beginning. The pain staking wait! Let alone you lot building it! Hats off to you two!
airgunnut
airgunnut - 5 dager siden
11.13 & 32.19 you know when you've made it the the world of youtube when you get to quote AEV
its not a twating stick, its a precision percussion adjustment tool
lockjawjak
lockjawjak - 5 dager siden
that has got to be the shortest turbo-intake manifold tract I have ever seen! Not even a sliver of piping they just bolt right onto the intercooler. That thing is gonna have mad response
Puffalupagus
Puffalupagus - 5 dager siden
17:46 if they just ended up putting the tops that were too small to start with from the id 1000's onto the 1050x's and just put a bigger o-ring on them, why did they just not put the bigger o-ring on the old 1000's and avoid all the spacer hullabaloo in the first place???
Chris Monkman
Chris Monkman - 6 dager siden
11:10 - best tell Nick to double check that heatshrink - looks like a lot of slack at the end where water could get in..
Ivailo Kartzov
Ivailo Kartzov - 6 dager siden
What's the music playing while the radiator gets choped ?
rd47blog
rd47blog - 6 dager siden
OK I get it, I'm old. These Cats can never finish Binky. It's a 'Ponzi Scheme'. Damn took my old ass yrs. to fiques this out. 'How many years have I been watching these 2 Cats???' beware, beware, beware hehehe visit my YT vids, no Adsense Native American add free
Filby
Filby - 6 dager siden
Maybe u should have called the car knock on effect...
Lol
The saga continues..
chding zuure
chding zuure - 6 dager siden
> throws carb in trash > "8 wires for the throttle body alone" I'm typing this from my first gen razr phone, btw.
Charlie
Charlie - 6 dager siden
I am puzzled, you must remember in my day Turbo meant foreign and probably not to reliable, but did or did not Nic spend a lot of time welding up a cooler for the turbo that mounted in front of the radiator now he has just manufacture one to put on the top?
Never mind I went back to episode 7, yeah it's been that long ago and found out there is a separate radiator for the charge cooler
1BigBen
1BigBen - 6 dager siden
if I remember this right the front cooler cools the water that cools the air coming from the turbocharger before it enter the throttle body
Kostas Doratis
Kostas Doratis - 6 dager siden
This was really satisfying..
chding zuure
chding zuure - 6 dager siden
FINALLY! MY NEEDED FIX OF OVERENGINEERED MADNESS! Edit: Gee those 44 minutes went by fast...
Frank J
Frank J - 6 dager siden
I just wanted to point out, at about 19:00 the statement was made "These are a very light interference fit but to get them to seat properly it was prudent while at the lathe to make an adapter-hammer interface to avoid damaging the new parts with the twatting stick."
Wouldn't that be a adapter-twatter interface?
I'm just looking for clarity...
Why I'm looking for that here, I'm not clear on.
dean king
dean king - 6 dager siden
Excellent completely top notch from you both as always!
asdreww
asdreww - 6 dager siden
40:21 is that a water/meth injection point I see on the chargecooler!?
roouit patan
roouit patan - 6 dager siden
0.37 Not to scare anyone but there is a goblin hiding in the engine 😱
terry tibbs
terry tibbs - 6 dager siden
Loving the attention to detail. But afraid I might be a long time dead before she's up & running
roouit patan
roouit patan - 6 dager siden
F1 driver would love to drive this little mini monster.
LT7 Automotive
LT7 Automotive - 6 dager siden
I didn't know you had a CNC machine. I thought I might have been
CNseeing things. Nice A-Team reference in the credits BTW.
Ben H
Ben H - 4 dager siden
Yeh, I had the same though. Looking back at the old videos they would have fabricated those bits using the wobbly hole saw and friends!
allothernamesbutthis
allothernamesbutthis - 6 dager siden
any odds on the car being wrapped in BOM logo's and paint revealed in final episode? :D
LT7 Automotive
LT7 Automotive - 6 dager siden
What you call Yank spec, some of us call Imperial...
portaltwo
portaltwo - 6 dager siden
And another fine video from "Making Brackets & Drilling Holes". Geez, only you guys could make this stuff (strangely?) fascinating! I eagerly await every new episode.
Cheezsoup
Cheezsoup - 6 dager siden
"Schmoo" and "angry pixies", watched too many AvE videos.
You'll be calling adjustable spanners "nut fuckers" next
PutteEevertti
PutteEevertti - 6 dager siden
This is just best youtube channel! love the way you do it
keith winterburn
keith winterburn - 6 dager siden
Connectors vertical..... you could have known that would happen, that's the coach builder in them
Jason
Jason - 6 dager siden
gotta love old fashioned mechanical engineering, haven't touched a mill or lathes, surface grinders since 2002, Now in Design for oil platforms, piping and layout, and this is refreshing to see, as id love to have my own machines; and the space.
keith winterburn
keith winterburn - 6 dager siden
It's really past being a car and its into an art form now
Jacob Sanders
Jacob Sanders - 6 dager siden
You guys are the reason I'm late for work today.


I regret nothing
Jacob Sanders
Jacob Sanders - 6 dager siden
How long ago did this build start?
dueeh nyyu
dueeh nyyu - 6 dager siden
FINALLY! MY NEEDED FIX OF OVERENGINEERED MADNESS! Edit: Gee those 44 minutes went by fast...
Darren Trueman
Darren Trueman - 6 dager siden
Been watching from beginning absolutely amazing 👍🏼👍🏼👍🏼
Neste